How do you set up and install your NETGEAR Wi-Fi Range Extender?
A Netgear wireless repeater is also known as a Range Extender, is a device that is useful to create the Second network by utilizing the current signal from the wireless router or wireless access point. Netgear Extenders run with any
standard Wi-Fi router that encourages you to get rid of Wi-Fi Dead Zones in your home is that irritating spot in your home or workplace where you enter No Wi-Fi area. Wireless range repeaters are the most comfortable and most active way to extend the existing scope of your Wi-Fi and strength in small offices and homes.
Netgear Extender Setup
Wondering about setting up a Netgear Wi-Fi extender in your home or office?
Whoopee, you are on the right page! Here, you will get to understand step-by-
step guidance for the Netgear extender setup. The most significant point that you need to consider is the essential requirements for a hassle-free Netgear extender setup.
Here are the necessary elements for a Wi-Fi range extender setup:
1. Arrange your Netgear Wi-Fi extender in the same room as that of your home router.
2. The Wi-Fi extender must get the appropriate power supply.
3. Next arrives a workable home Wi-Fi network.
4. It is always advisable to have more than two web browsers installed on your PC or laptop. A situation may occur when you fail to log into the new wifi extender setup page because of the web browser problem. In this case, you can go with another browser.
So, these were some crucial points to keep in mind prior to setting up a new wifi range extender. Let’s continue further with the setup process instructions for your Netgear wifi range extender.
You can set up a Wi-Fi range extender by two methods: The manual method and the WPS method. Let’s study both ways one by one.
1. Netgear Extender Setup: using a Manual Method -
The manual method of the Netgear Wi-Fi range extender setup, also recognized as a web browser setup method. Follow the instructions given below to set up your Netgear Wi-Fi range extender:
● Power on your Wi-Fi range extender by plugging it into an electrical socket.
● Connect the range extender with your Wi-Fi device.
● Open the network manager and join to Netgear_ext.
● Start any web browser of your choice and drive to the default mywifiext login web page.
● Create a mywifiext login account if you don’t own already.
● Select the network that you want to extend.
● Hit on the Next button.
● In the end, click on the finish button.
Cheers! You have successfully achieved the new range extender setup. Now,
you are free to set your range extender wherever you like.
2. Netgear Extender Setup using WPS Method:
Wi-Fi Protected Setup or WPS is the most effortless method for the Netgear Wi-Fi range extender setup. All you need to do is understand and follow the below-given steps:
● Unbox the Range Extender, plug it in immediately in the electrical terminal.
For easy setup and installation, you should perform the setup process in the
same room where is your current router.
● Look for the WPS button on the front or back of the router. Firstly, Press the
WPS Button on the Netgear Range Extender and within a 1-minute, press the
WPS button on your existing Wi-Fi Router.
● WPS led changes to solid green on the Netgear extender when you establish
a good connection between the range extender and current Wi-Fi router.
● Now, unplug the extender from the socket and move it to the new desired
position.
● While the power LED is on, use the Netgear extender light to determine
whether the connection between the extender and the router is optimum or
not. Amber or Greenlight indicates they found an ideal location of the
extender, but if the LED glows RED, then put the extender closer to the router
to enhance the connection.
● Once you found a perfect location, then connect any wireless device to the
extender. It will accept the existing Wi-Fi name and adds _2gext or _5gext in
the end. You can pick any one of them.
● When connecting to Wi-Fi extender, utilize the same Wi-Fi password as of
your router and work with the client led light on the extender to ensure the
extender setup is successfully finished or not.
Note: If the client LED is green, the setup and installation gets completed, or
if it’s red, then the range extender is not reaching the area due to the weak
Wi-Fi signals, then if possible, relocate your device little near to the extender
until the client link Led shifts red to green.